Arbiair Clear RM (REGULAR + CMYK)

• Soft-hand feel
• Good washing fastness
• Good printability and stability on screen
• Easy clean-up with soap and water
• Dual-purpose usage, airbrush and screen-print

• 100% Cotton
• 50/50 Cotton-polyester blend/synthetic fiber
• Spandex/dry-fit
• Calico/Canvas

Arbiair series is compatible with airbrush tool and direct-to-textile printing on cut-piece articles and ready-to-wear outfit.

For Airbrush Procedure

1. Prepare your airbrush/pen tool. Preferably use the double action type for greater control and easy clean, as a single action has less moving parts. Ideally, use at least a 100 P.S.I. air compressor and then prepare your inks and practice controlling atomization.
   
2. On use of color, clean the airbrush tool to prevent colors from mixing in the airbrush. Blow water out on a rag or a piece of scratch paper.
   
3. Wash out the airbrush tool immediately after you are done painting. Make sure to disassemble carefully for a sure clean.

For Screen-printing Procedure

1. The printing process can be done either manual or via automatic screen-printing. Suggested maximum of three [3] strokes, three [3] coats, except when printing tonal or CMYK process.
   
2. In halftone print, one [1] stroke is ideal but two [2] strokes are acceptable, however, one [1] coat only is highly suggested.
   
3. Curing is recommended to greatly increase washing fastness. Curing will also give the print a glossier print output.

80T-120T, monofilament

Squeegee

Less Ink Deposit

• Medium (65-75 Durometer) / Hard (80-90 Durometer)
• Square (Straight edge)

More Ink Deposit

• Soft (50-60 Durometer)
• Round (Bull nose)

• Drying time : 10 seconds
• Temperature : 110ºC (230ºF)
• Equipment : Heat press/oven/flash cure
• Pre-curing : Heat gun

Time and temperature may vary depending on the curing equipment used.

Wash materials used with soap and water. Observe all local regulations when disposing of this substance.

Store tightly covered at temperatures between 10ºC – 30ºC (50ºF – 86ºF) and a relative humidity between that of 25% to 70%. Keep away from direct sunlight or high temperatures.

[EN]

Instruction

• Stir well before using ink.
• Pre-test fabric compatibility prior to mass production.
• Wash test must be carried out 24 hours after printing.

Precaution

• Wear protective gloves if there is continual contact of ink for sensitive skins.
• Avoid any contact with eyes.
• Wash hands thoroughly at the end of work.
• Do not swallow.
• Keep out of reach of children.

Storage and Handling

• Ensure good ventilation at the workplace.
• Close lid after use.
• Dispose of the waste according to your local regulation.

[FR]

Instruction

• Mélanger avant utilisation.
• Tester sur échantillonnage avant
  production en masse.
• Lavage 24 heures après impression.

Precaution

• Porter des gants si il y a contact prolonge avec la peau si peaux sensibles.
• Eviter tout contact avec les yeux.
• Nettoyer vos mains après utilisation.
• Ne pas avaler.

Entreposage et Manutention

• A utiliser dans une pièce aérée.
• Refermer couvercle après usage.
• Veuillez disposer du produit suivant les normes en vigueur dans votre pays.