1 7

Arbitrend Puff

Arbitrend Puff

Size

Product Description

Arbitrend Puff is a special effect ink that creates a puff or emboss print effect. When subjected to heat, it expands, offering a distinctive tactile effect rather than a flat print. This base requires direct printing on the substrate and cannot be used as an overprint.

Feature

  • Soft-hand feel with good washing fastness
  • Fashion-base effects with puff effect
  • Good printability and stability on screen
  • Easy cleanup with soap and water

Material Compatibility

  • 100% Cotton
  • 50/50 Cotton-polyester blend/synthetic fiber
  • Calico/Canvas

Product Application and Usage

Direct to textile substrate only. Do not print on top of any water-based or plastisol print. For cut-piece articles and

  1. The printing process can be done either manual or via automatic screen-printing. Suggested maximum of three [3] strokes, three [3] coats.
  2. Curing is recommended to greatly increase washing fastness. Curing will also give the print a glossier print output.

Screen Mesh and Squeegee

80T-120T, monofilament

Squeegee

Less Ink Deposit

  • Medium (65-75 Durometer) / Hard (80-90 Durometer)
  • Square (Straight edge)

More Ink Deposit

  • Soft (50-60 Durometer)
  • Round (Bull nose)

Recommended Curing Parameters

  • Drying time : 10 seconds
  • Temperature : 110ºC (230ºF)
  • Equipment : Heat press/oven/flash cure
  • Pre-curing : Heat gun

Time and temperature may vary depending on the curing equipment used.

Clean-Up

Wash materials used with soap and water. Observe all local regulations when disposing of this substance.

Product Safety, Handling and Storage

Store tightly covered at temperatures between 10ºC – 30ºC (50ºF – 86ºF) and a relative humidity between that of 25% to 70%. Keep away from direct sunlight or high temperatures

Label Instructions

[EN]

Instruction

  • Stir well before using ink.
  • Pre-test fabric compatibility prior to mass production.
  • Wash test must be carried out 24 hours after printing.

Precaution

  • Wear protective gloves if there is continual contact of ink for sensitive skins.
  • Avoid any contact with eyes.
  • Wash hands thoroughly at the end of work.
  • Do not swallow.
  • Keep out of reach of children.

Storage and Handling

  • Ensure good ventilation at the workplace.
  • Close lid after use.
  • Dispose of the waste according to your local regulation.

[FR]

Instruction

  • Mélanger avant utilisation.
  • Tester sur échantillonnage avant
    production en masse.
  • Lavage 24 heures après impression.

Precaution

  • Porter des gants si il y a contact prolonge avec la peau si peaux sensibles.
  • Eviter tout contact avec les yeux.
  • Nettoyer vos mains après utilisation.
  • Ne pas avaler.

Entreposage et Manutention

  • A utiliser dans une pièce aérée.
  • Refermer couvercle après usage.
  • Veuillez disposer du produit suivant les normes en vigueur dans votre pays.
Technical Data Sheet
Color Chart
View full details

Other related products

View all

Important Notice

This technical data sheet does not replace the Safety Data Sheet and should be used according to its recommended purpose. Any person using the product other than that specifically recommended does so at his own risk.

While we endeavor to ensure that all recommendations about our products are correct, many factors may affect the application of the product. It is advised that the quality of the substrate, the condition of the curing method, and other printing characteristics brilliance before mass production.

Disclaimer

The information and recommendation in this publication are to the best of our knowledge, information, and belief accurate at the date of publication. Nothing herein is to be construed as a warranty, express or implied.

In all cases, it is the responsibility of users to determine the applicability of such information or the suitability of any products for their own particular purpose. Therefore, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage incurred out of the use of the product.

The information contained herein is liable to modification from time to time in light of continuous product development or improvements.